Igeelee Portable Hole Making Tool Manual Hole Punch Tool Mechanical Hole Making Tool 13mm-19mm Hand Hole Digging Tool
- Port:
- Ningbo
Product Description
Mechanical Punch Tool MH-10
Max thickness of thickness | ≤10mm |
Punching range | ∠40-∠110(A3F) |
Punching force | 300KN |
Hand force | ∠0.25 |
Depth of throat | 40mm |
Main Material | Steel |
Weight | Approx.19.0kg |
Size | 360X250mm |
Accessories | Φ13, Φ15, Φ17, Φ19, Φ21mm |
Features
1. The use of leverage, screw force, easy to operate and save effort. the main use of alloy, punching hole just need only 20-30 seconds.
2.The main stress head is made of high-strength alloy steel, light weight, easy to carry.
3.Simple structure, easy operation, without power, time saving, effort saving. Especially suitable for aerial work.
4. Choose required aperture matching punching, die. Installed in the Lord shall have a head.
5. The workpiece insert die head, opening, alignment scribed line, turn the die clamping work.
6. Shake hands, punch press, then rushed out of hole.
Functions and using range
1. 10 kv power department distribution network crossarm, tower reamer, repair hole, hole; Power plants, substations, copper aluminum bus, terminal connector, flat steel, etc open hole.
2. Railroad, post and telecommunications, oil, geology, construction industry overhaul reinforcement. Because the machine does not need to electric energy, especially suitable for field, high altitude and underwater operations.
Warning
1. Operation inspection punch, die if corresponding, otherwise will damage the host.
2. Before punching die must first spinning tight work.
3. Operation process such as the discovery of abnormal failure, shall immediately stop punching, debugging, lest damage parts.
4. Wire rod, wire mother should often oil lubrication
Product Categories : Busbar Processing Tools
Premium Related Products
